In order to accomplish this, you need to select the real address of the hosts/networks to be given access and they then have to be mapped to a pool of translated IP addresses.Ĭomplete these steps in order to allow inside hosts access to outside networks with NAT: You could allow a group of inside hosts/networks to access the outside world by configuring the dynamic NAT rules. However, if you have any translation rule configured, then disabling this feature does not remain valid for all the traffic and you will need to explicitly exempt the networks from address translation.Īllow Inside Hosts Access to Outside Networks with NAT The image shown here depicts how to disable this through ASDM in order to allow connections through the ASA without any address translation. No connection can pass through the Security Appliance without a translation rule configured. This can also include connections from one DMZ to another, as long as the connection source interface has a higher security level than the destination. This includes connections from inside to outside, inside to Demilitarized Zones (DMZs), and DMZs to outside. Outbound access describes connections from a higher security level interface to a lower security level interface. They are RFC 1918 addresses which have been used in a lab environment. The IP addressing schemes used in this configuration are not legally routable on the Internet. Refer to Cisco Technical Tips Conventions for more information on document conventions. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. The information in this document was created from the devices in a specific lab environment. Note: This configuration works fine from Cisco ASA software version 8.0 to 8.2 only, because there are no major changes in the NAT functionality. The information in this document is based on these software and hardware versions:

Prerequisites RequirementsĬisco recommends that you have knowledge of these topics: It deals with the access control of the traffic through the ASA and how translation rules work. This document describes how the port redirection works on Cisco Adaptive Security Appliance (ASA) using ASDM.

Cisco asdm 6.3 for asa download